Difference between revisions of "S-61R Pelican/Release Notes"

From
Jump to: navigation, search
(V9.1 Release Notes)
(V1.1 Release Notes (2022.02.18))
 
(22 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== V9.1 Release Notes ==
+
== V1.2 Release Notes (2022.09.13) ==
 +
* Updated for compatibility with kimbi bucket.
 +
 
 +
== V1.1 Release Notes (2022.02.18) ==
 +
* Fixed Engines fail to flame out when fuel is exhausted
 +
* Fixed Starting engines without the apu running fails to cause transmission wear
 +
* Adjusted engine oil temps. when operating single-engine
 +
* Heater now consumes fuel
 +
* Reduced the Frequency of patient health state changes
 +
* Allowed radar altitude autopilot hover
 +
* Fixed gps commands top/bottom/down/up
 +
* Knobs now switchable by clicking backing
 +
* Added gps route command
 +
* Added working radios
 +
* Added weather 2.0
 +
* Added icing
 +
* Added deicing mechanisms
 +
* Added ILS approaches
 +
* Added HSI/NAV instruments to HUD
 +
* Added retreating blade stall effects
 +
* Moved severed rescue hoist cable repair to the workbench
 +
* Added slip indicator to HUD
 +
* Reworked AFCS to improve stability when transitioning to autohover
 +
 
 +
== V1.0 Release Notes (2020.08.21) ==
 +
 
 +
* Fixed bug in marker Beacons
 +
* Fixed GPS chat command bugs
 +
* Added searchlight chat commands
 +
* Made qstart set transponder to Normal
 +
* Added patient health change messages
 +
* Ignoring collisions with seated avi to avoid messages with the new LL region crossing code.
 +
* Integrated ramps into onboard
 +
* Added backboard and headblocks for stokes
 +
* Added checklist HUD
 +
* Added missing command summary notecard.
 +
 
 +
== V0.9.3 Release Notes (2020.07.26) ==
 +
 
 +
* Removed unnecessary tint on tail rotor.
 +
* Added "wx" commands for controlling ceiling.
 +
* Fixed "start" command message.
 +
* Added sounds for engine/apu fires.
 +
* Added more failure rates.
 +
* Fixed activating cable shear in "cargo" version causes bad behavior.
 +
* Added burned textures for the engines and apu
 +
* Added burned out bulbs for warning lights
 +
* Added box of replacement bulbs on workbench.
 +
* Fixed "Repair all resets the air bottle used flag but does not refill bottle"
 +
* Updated Emergency Fuel Control Levers checklist page
 +
 
 +
== V0.9.2 Release Notes (2020.07.10) ==
 +
 
 +
* Fixed "engine dies when engine controller fails"
 +
* Added engine chip lights
 +
* Updated scripts for "cargo conversion kit" compatibility.
 +
* Added "extra" textures
 +
* Added cargo conversion kit
 +
* Added covers
 +
* Fixed "starter/igniter sounds don't work when there are any failures"
 +
* Fixed "wheels keep spinning if A/C goes non-physical while in ground motion"
 +
 
 +
== V0.9.1 Release Notes (2020.07.03) ==
  
 
* Improved Emergency Fuel Lever Handling
 
* Improved Emergency Fuel Lever Handling
 
* Fixed "Turning off fluid consumption sets APU accumulator level to 0 and prevents APU starting"
 
* Fixed "Turning off fluid consumption sets APU accumulator level to 0 and prevents APU starting"
 
* Fixed "Tail rotor strikes damage main rotor instead"
 
* Fixed "Tail rotor strikes damage main rotor instead"
 +
* Fixed "Anchoring too close to a sim edge can cause the aircraft to be flung around if it crosses the sim edge while anchored" (will auto unanchor on crossing)
 
* Improved handling on water with wind.
 
* Improved handling on water with wind.
* Auto unanchor on region crossing.
+
* Checklist fixes (e.g., missing diagrams)
 +
* Improved HD water bullet detection for engine fire suppression
 +
* Fixed "workbench does not clear fire detect flag on engine replacement"
 +
 
 +
== V0.9.0 Release Notes (2020.06.26) ==
 +
* Initial public beta release.

Latest revision as of 01:55, 14 September 2022

1 V1.2 Release Notes (2022.09.13)

  • Updated for compatibility with kimbi bucket.

2 V1.1 Release Notes (2022.02.18)

  • Fixed Engines fail to flame out when fuel is exhausted
  • Fixed Starting engines without the apu running fails to cause transmission wear
  • Adjusted engine oil temps. when operating single-engine
  • Heater now consumes fuel
  • Reduced the Frequency of patient health state changes
  • Allowed radar altitude autopilot hover
  • Fixed gps commands top/bottom/down/up
  • Knobs now switchable by clicking backing
  • Added gps route command
  • Added working radios
  • Added weather 2.0
  • Added icing
  • Added deicing mechanisms
  • Added ILS approaches
  • Added HSI/NAV instruments to HUD
  • Added retreating blade stall effects
  • Moved severed rescue hoist cable repair to the workbench
  • Added slip indicator to HUD
  • Reworked AFCS to improve stability when transitioning to autohover

3 V1.0 Release Notes (2020.08.21)

  • Fixed bug in marker Beacons
  • Fixed GPS chat command bugs
  • Added searchlight chat commands
  • Made qstart set transponder to Normal
  • Added patient health change messages
  • Ignoring collisions with seated avi to avoid messages with the new LL region crossing code.
  • Integrated ramps into onboard
  • Added backboard and headblocks for stokes
  • Added checklist HUD
  • Added missing command summary notecard.

4 V0.9.3 Release Notes (2020.07.26)

  • Removed unnecessary tint on tail rotor.
  • Added "wx" commands for controlling ceiling.
  • Fixed "start" command message.
  • Added sounds for engine/apu fires.
  • Added more failure rates.
  • Fixed activating cable shear in "cargo" version causes bad behavior.
  • Added burned textures for the engines and apu
  • Added burned out bulbs for warning lights
  • Added box of replacement bulbs on workbench.
  • Fixed "Repair all resets the air bottle used flag but does not refill bottle"
  • Updated Emergency Fuel Control Levers checklist page

5 V0.9.2 Release Notes (2020.07.10)

  • Fixed "engine dies when engine controller fails"
  • Added engine chip lights
  • Updated scripts for "cargo conversion kit" compatibility.
  • Added "extra" textures
  • Added cargo conversion kit
  • Added covers
  • Fixed "starter/igniter sounds don't work when there are any failures"
  • Fixed "wheels keep spinning if A/C goes non-physical while in ground motion"

6 V0.9.1 Release Notes (2020.07.03)

  • Improved Emergency Fuel Lever Handling
  • Fixed "Turning off fluid consumption sets APU accumulator level to 0 and prevents APU starting"
  • Fixed "Tail rotor strikes damage main rotor instead"
  • Fixed "Anchoring too close to a sim edge can cause the aircraft to be flung around if it crosses the sim edge while anchored" (will auto unanchor on crossing)
  • Improved handling on water with wind.
  • Checklist fixes (e.g., missing diagrams)
  • Improved HD water bullet detection for engine fire suppression
  • Fixed "workbench does not clear fire detect flag on engine replacement"

7 V0.9.0 Release Notes (2020.06.26)

  • Initial public beta release.