Difference between revisions of "KellyFuel"
(→Introduction) |
(→Fueling Aircraft) |
||
| (8 intermediate revisions by the same user not shown) | |||
| Line 12: | Line 12: | ||
== Introduction == | == Introduction == | ||
| − | The KellyFuel | + | The KellyFuel pump is intended as a universal fueling system to enable fueling for both SA and non-SA aircraft. The pumps will attempt to identify the aircraft type and identify the fueling system used by that aircraft. The supported fueling systems are: |
* KellyFuel - Used by SA and aircraft by participating creators. | * KellyFuel - Used by SA and aircraft by participating creators. | ||
* Basic - Aircraft that use the "refuel" command in local chat. | * Basic - Aircraft that use the "refuel" command in local chat. | ||
| − | The procedure for fueling are nearly the same for both types except that basic fuel system aircraft usually only support a single tank per aircraft. | + | The procedure for fueling are nearly the same for both types except that basic fuel system aircraft usually only support a single tank per aircraft. To use the the pump, you must first "connect" the aircraft with the pump, then following the fueling procedure as described in the following sections. |
| − | == | + | == Connecting Aircraft == |
To use the KellyFuel 3.0 pump to service your aircraft, use the following procedure to prepare aircraft for fueling: | To use the KellyFuel 3.0 pump to service your aircraft, use the following procedure to prepare aircraft for fueling: | ||
| Line 25: | Line 25: | ||
# Park aircraft within 20m of pump. | # Park aircraft within 20m of pump. | ||
# Click pump. Select aircraft by tail number, or aircraft type. | # Click pump. Select aircraft by tail number, or aircraft type. | ||
| − | # | + | # If the aircraft has multiple tanks, select tank to be filled. If the aircraft has only one tank, it will be automatically selected. |
| − | # | + | # If the aircraft requires it, open any access doors and caps for that tank. |
| − | + | ||
| + | == Grounding Your Aircraft == | ||
| + | |||
| + | Before fueling, you should ground your aircraft to prevent fires from static discharges. You may use the ground wire spool | ||
| + | on either side of the pump (Jet-A or 100LL side). Failure to ground your aircraft can result in a fuel fire (with HD fire). | ||
== Fueling Aircraft == | == Fueling Aircraft == | ||
| Line 33: | Line 37: | ||
Once aircraft has been selected, to Fuel Aircraft: | Once aircraft has been selected, to Fuel Aircraft: | ||
| − | # Click on fuel hose | + | # Click on the fuel hose for the correct type of fuel for your aircraft (Jet-A or 100LL). This will cause the hose to be routed to your aircraft with the nozzle in the fuel filler port. |
# Press ENT on keypad to verify it has been grounded | # Press ENT on keypad to verify it has been grounded | ||
# Click the credit card reader to "read" your credit card (RP Only) | # Click the credit card reader to "read" your credit card (RP Only) | ||
| − | # Select 2 for Jet-A Fuel | + | # Select 1) for 100LL or 2) for Jet-A Fuel |
| − | # Enter the maximum number of gallons, then ENT | + | # Enter the maximum number of gallons on the keypad, then press ENT |
| − | # Reset the meter by clicking the knob on the side | + | # Reset the meter on the on the 100LL (or Jet-A) side by clicking the knob on the side |
| − | # Turn the switch | + | # Turn the switch on the pump on the 100LL (or Jet-A) side by clicking on it to put it in the ON position. |
# Wait for fueling to complete. Fueling will stop when requested number of gallons have been added, the tank is full, or you turn the fuel switch to OFF. | # Wait for fueling to complete. Fueling will stop when requested number of gallons have been added, the tank is full, or you turn the fuel switch to OFF. | ||
# Press either 1 to fuel another tank, or 2 to end fueling. | # Press either 1 to fuel another tank, or 2 to end fueling. | ||
| − | [[KellyFuel/Creator | + | == For Creators == |
| + | |||
| + | For creators wishing to use KellyFuel in their aircraft please see [[KellyFuel/Creator Instructions|KellyFuel Creator Instructions]]. | ||
Latest revision as of 23:53, 26 August 2022
|
Kelly Fuel |
|
|
Contents
1 Introduction
The KellyFuel pump is intended as a universal fueling system to enable fueling for both SA and non-SA aircraft. The pumps will attempt to identify the aircraft type and identify the fueling system used by that aircraft. The supported fueling systems are:
- KellyFuel - Used by SA and aircraft by participating creators.
- Basic - Aircraft that use the "refuel" command in local chat.
The procedure for fueling are nearly the same for both types except that basic fuel system aircraft usually only support a single tank per aircraft. To use the the pump, you must first "connect" the aircraft with the pump, then following the fueling procedure as described in the following sections.
2 Connecting Aircraft
To use the KellyFuel 3.0 pump to service your aircraft, use the following procedure to prepare aircraft for fueling:
- Park aircraft within 20m of pump.
- Click pump. Select aircraft by tail number, or aircraft type.
- If the aircraft has multiple tanks, select tank to be filled. If the aircraft has only one tank, it will be automatically selected.
- If the aircraft requires it, open any access doors and caps for that tank.
3 Grounding Your Aircraft
Before fueling, you should ground your aircraft to prevent fires from static discharges. You may use the ground wire spool on either side of the pump (Jet-A or 100LL side). Failure to ground your aircraft can result in a fuel fire (with HD fire).
4 Fueling Aircraft
Once aircraft has been selected, to Fuel Aircraft:
- Click on the fuel hose for the correct type of fuel for your aircraft (Jet-A or 100LL). This will cause the hose to be routed to your aircraft with the nozzle in the fuel filler port.
- Press ENT on keypad to verify it has been grounded
- Click the credit card reader to "read" your credit card (RP Only)
- Select 1) for 100LL or 2) for Jet-A Fuel
- Enter the maximum number of gallons on the keypad, then press ENT
- Reset the meter on the on the 100LL (or Jet-A) side by clicking the knob on the side
- Turn the switch on the pump on the 100LL (or Jet-A) side by clicking on it to put it in the ON position.
- Wait for fueling to complete. Fueling will stop when requested number of gallons have been added, the tank is full, or you turn the fuel switch to OFF.
- Press either 1 to fuel another tank, or 2 to end fueling.
5 For Creators
For creators wishing to use KellyFuel in their aircraft please see KellyFuel Creator Instructions.
