EC-135/General

From
Jump to: navigation, search

SECTION 1. GENERAL

1 N-NUMBER ASSIGNMENT

When you rez your aircraft for the first time, it will attempt to contact registration server and assign you a unique N-number. If for some reason the server cannot be contacted, the aircraft will retain the "N-TEMP" registration. You can attempt to register again either by rerezing the aircraft, or by going to the @REGISTER menu and selecting the [Register Now] button. When an aircraft has not been registered, the @REGISTER will be available on the main menu. Once the aircraft is registered, you can access the @REGISTER menu as a sub-menu of the @Admin menu. You can also request a different N-number through the @REGISTER menu. Select the [N Number] button and enter an N-Number request. The N-number must be in a valid format, and must not be assigned to another aircraft. Valid N-Numbers must begin with an "N", followed by 3 to 5 alpha-numeric digits (however, only the last two digits may be letters). Alternatively you can select one of several international registration formats such as L-LLLL or LL-LLL where the "L" are letters, or a militaty format with five numeric digits.

2 CONTROLS

This aircraft supports two separate control schemes: Keyboard-based and HUD-based. The control scheme is set in the @Options menu. Regardless of the scheme selected, controls can also be moved through the HUD by pressing and holding the left mouse button and dragging the appropriate slider in the HUD. In both control schemes, some key commands are activated through gestures included in a box as part of the product carton. Key commands requiring a gesture are marked with a [G] in the key command lists below.


2.1 CONTROLS LAYOUT "K" (KEYBOARD)

Keyboard control features a traditional layout with the cyclic controlled by the arrow keys.

Key Description
Left/Right/Up/Down (or A/D/W/S) cyclic (Left/Right/Forward.Back)
PgUp/PgDown (or E/C) Collective (Up/Down)
L. Mouse + Left/Right (or A/D) Pedals (left/right)*
Shift-Left/Shift-Right Alternate pedal control (not available in mouselook)
Z/X Alternate pedal keys (left/right) [G]
. Center cyclic [G]
p Toggle camera view [G]
r/v Throttle #1 up/down when engine in manual mode [G]
y/n Throttle #2 up/down when 2 engines in manual mode [G]
  • NOTE ON PEDALS: Because the left mouse button is intercepted by the touch scripts in the heli, the L.Mouse + Arrow key combination will only work in mouselook, or in external view modes. There is also a "mouselook touch" mode that is toggled by the "mlt" chat command. This toggles whether mouse clicks while in mouselook affect switches and buttons in the cockpit, or are used for pedals.

2.2 CONTROL LAYOUT "H" (HUD)

HUD control is designed to be used with the left hand on the WASD buttons, and right hand on the mouse controlling the cyclic in the HUD (by dragging the red dot on the HUD). It is also possible to use gestures for the JKLI buttons to control cyclic with the mode.

Key Description
Up/Down (or W/S) Collective up/down.
Left/Right (or A/D) Anti-torque pedals.
J/L/I/K *Cyclic left/right/forward/back. [G]
. Center cyclic [G]
p Toggle camera view [G]
e/c or r/v Throttle #1 up/down when engine in manual mode [G]
y/n Throttle #2 up/down when 2 engines in manual mode [G]

3 Mouselook Touch

Because of SL limitations, it is not possible to use the mouse button for both clicking on controls, and using it to modulate the Left/Right keys to be used for the anti-torque pedals. For this reason, most Shergood helicopters use the "mlt" chat command to toggle the functionality of the left mouse button between being used to click on controls, and being used for pedal control.

Note: Some common mesh attachments can interfere with MLT, if you experience issues with the aircraft not responding to touches in MLT, remove all mesh attachments and reattach them one at a time to identify the one causing it.

4 CHAT COMMANDS

A complete list of chat commands is included in the Appendices. A few important commands are discussed in the following sections.

4.1 Quick Start

Like all Shergood aircraft there is a command, "qstart", to start the helicopter quickly. In order to use this command, there must be someone sitting in the pilot seat. Note that the qstart command works by initiating a script that configures the helicopter for flight and does not instantly put the helicopter in a flyable state. The script includes pauses to wait for various systems to spin up to speed such as the APU, each engine and the rotor system. Once issuing the qstart command, it is recommended to wait for the rotor system to reach 100% before attempting flight.

The qstart command does not by default correct any failed systems. Some system failures may prevent the qstart process from completing. In this case, there will be a message in local chat informing that qstart has timed out. You can correct failed components either by clicking on the component or using the "Repair All" button from the "@Cheat" menu.

4.2 Fine Control

The "fc" chat command or "q" gesture toggles fine control mode for key commands. This can be useful when higher precision is need such as for making an accurate landing on a small platform. When in fine control mode, the effect of control keys are halved.

5 Gestures

Key Description
p Toggle camera view
shift-c Collective full down
t Toggle mouselook touch
q Toggle fine control
. Center cyclic
I Cyclic forward
J Cyclic left
K Cyclic back
L Cyclic right
z Pedal left
x Pedal right
r Increase throttle #1
v Decrease throttle #1
y Increase throttle #2
n Decrease throttle #2

6 CAMERA

The default camera position is inside the cockpit with a view through the front glass. It is also possible to switch to an outside "follow cam" view by typing "cv" or wear the "cameraViews" gestures and use "p" key to toggle views. An additional overhead view can be selected with the "cv2" command. In addition, it is possible to fly in mouselook when using one of the keyboard based flight control methods.