MD-500D/Painting Resources
SECTION 15. PAINTING RESOURCES
Contents
1 Files
The following files are provided for creating custom MD-500D paint schemes.
The paint template is provided in GIMP XCF format and may be opened using GIMP.
The template provides the UV layouts for the aircraft exterior, allowing custom liveries to be created using image editing applications such as GIMP or Photoshop.
2 Base Paint Textures
The MD-500D uses four separate textures for its exterior paint scheme:
| Texture | Description |
|---|---|
| left | Left side of the fuselage and associated exterior components. |
| right | Right side of the fuselage and associated exterior components. |
| boom | Tail boom, tail surfaces, and associated components. |
| text | Aircraft markings, placards, and other fine details. |
The four textures are applied to separate regions of the aircraft model. Each texture may be edited independently, although paint schemes that extend across multiple regions must be aligned at the corresponding UV boundaries.
Care should be taken to maintain continuity of stripes, color transitions, and other markings across texture boundaries.
2.1 Texture Boundaries
When creating paint schemes that extend across multiple texture regions, the artwork should be aligned carefully to avoid visible seams.
Texture filtering and mipmapping may cause pixels near the edge of a UV island to blend with adjacent pixels. To minimize these artifacts, extend painted colors beyond the UV island boundaries wherever possible.
Adequate padding around UV islands is particularly important when using high-contrast paint schemes.
3 PBR Materials
Unlike the S-61R, which uses the traditional Second Life Blinn-Phong material system, the MD-500D uses Physically Based Rendering (PBR) materials.
PBR materials allow the appearance of painted aircraft surfaces to be controlled using physically based material properties rather than the legacy diffuse, normal, and specular texture system.
The MD-500D paint system uses the four texture regions described above, each associated with its corresponding PBR material.
3.1 Base Color
The base color texture defines the visible paint scheme, including colors, stripes, logos, and aircraft markings.
The base color should generally be created without baked lighting effects such as highlights or directional reflections. These effects are produced by the PBR rendering system.
3.2 Metallic and Roughness
PBR materials use metallic and roughness properties to control the appearance of reflections.
- Metallic - Determines whether a surface behaves as a metallic or nonmetallic material.
- Roughness - Controls the sharpness and distribution of reflected light. Lower roughness produces sharper reflections, while higher roughness produces a more diffuse appearance.
Most painted helicopter surfaces should be treated as nonmetallic materials. The underlying metal structure does not make an opaque painted surface metallic for PBR purposes.
Glossy aircraft paint generally uses a relatively low roughness value, while matte and weathered finishes use higher values.
3.3 Normal Maps
Normal maps may be used to represent small surface details without adding geometry.
Examples include panel details, rivets, and subtle surface irregularities.
Normal maps should be used conservatively to avoid producing exaggerated surface effects.
3.4 Emissive Materials
Emissive textures are used for surfaces that produce their own light, such as illuminated markings or displays.
Emissive properties are generally not required for the primary exterior paint surfaces.
4 Text Overlay Texture
The text texture contains aircraft markings and fine details that may require greater resolution than is available in the main exterior textures.
These include:
- Fuel and oil servicing placards.
- Maintenance and warning labels.
- Equipment identification markings.
- Small exterior lettering and instructions.
The text texture is separate from the left, right, and boom paint textures, allowing fine markings to be maintained independently of the main livery.
When modifying this texture, care should be taken to preserve essential safety markings and operating instructions.
5 Creating a Custom Paint
The general procedure for creating a custom MD-500D paint scheme is as follows:
- Download the MD-500D GIMP paint template.
- Open the template in GIMP or another compatible image editing application.
- Create the desired paint scheme for the left, right, and boom texture regions.
- Modify the text texture if custom markings are required.
- Verify alignment of artwork across texture boundaries.
- Prepare the base color textures and any additional PBR material maps.
- Export the completed textures in the required format.
- Upload the textures or materials to Second Life.
- Apply the completed paint using the Shergood Aviation paint system.
- Inspect the aircraft for alignment errors, visible seams, and incorrect material appearance.
6 Applying a Custom Paint
Custom paint schemes are applied using the Shergood Aviation painting system.
The four texture regions must be assigned to their corresponding material locations.
The paint should be inspected under a variety of lighting conditions, since PBR materials respond to environmental lighting and reflections.
Particular attention should be given to:
- Alignment between the left, right, and boom textures.
- Visibility and legibility of markings on the text texture.
- Consistency of metallic and roughness properties.
- Visible seams or artifacts at UV boundaries.
- Appearance under daylight, nighttime, and artificial lighting.