UH-4 Commuter/Normal Procedures

1 STARTING

Use the following procedure for normal starts:

1. Cyclic, anti-torque pedals neutral. Collective full down.
2. Master On
3. Alternator On
4. Throttle to idle
5. Mixture full rich
6. Mags to Both
7. Press and hold starter until engine starts
8. Slowly roll throttle on to 2500
9. Governor on
10. Allow RPM increase to 2900

To bypass the normal procedure and start immediately, you can use the "Fast Start" button or simply type "qstart" in local chat.

2 SHUT DOWN

Use the following procedure to shut down the engine:

1. Governor off
2. Throttle to idle
3. Mixture lean
4. After engine stops, mags to off
5. Master and Alternator Off