Deicing Truck Add-on
The Shergood Deicer is an add-on for the Lusch Hermes Modular Truck. It is compatible with select Shergood aircraft and can be used for both deicing and anti-icing purposes. The truck has a 1500 gallon main tank for Type 1 deicing fluid, and a 300 gallon secondary tank which can be used for Type 2, 3 or 4 deicing fluids. Fluids can be applied through a sprayer on a boom mounted bucket, or through a hose system at the back of the vehicle. The truck is refilled using 250 gallon totes.
To install your deicing add-on, use the following procedure:
- Rez your deicer add-on next to your Lusch Hermes Modular Truck.
- Click the truck and select "EDIT MODE" from the menu.
- Wait approximately 5 seconds for the hover text on the truck to change to "EDIT MODE ON!".
- Right click on the deicer add-on and select "Edit".
- Hold shift and click on the truck.
- Select "Link" from the edit menu. The deicer add-on should snap into place.
- Click on the truck cab and select "YES" when it asks if you want to exit edit mode.
Your deicer truck is now ready to use.
2.1 Truck Number
When you first attach your truck, it will be assigned a random number between 0 and 999 that is displayed in on the base of the boom. This number is used to identify your truck when filling fluids. You can set your own number by clicking on the deicer part of the truck and selecting Number from the menu.
3 De-Icing and Anti-Icing Fluids
3.1 Fluid Types
There are four main times of de-cing and anti-icing fluids used for aircraft: Type 1, 2, 3 and 4. Type 1 fluids are applied hot, have the lowest viscosity and are generally used for removing existing ice from an aircraft. Type 2 and 4 fluids include a thickening agent to make them stick to the aircraft to prevent ice from adhering to it. Type 3 fluids have an intermediate thickness between Type 1 and Type 2/4. Note that the anti-icing fluids Type 2,3,4 generally do not do well at ice removal. For the reason it is generally recommended that line personal first clear ice from the aircraft with Type 1 fluid, then if current weather conditions are conducive to icing, apply the appropriate anti-icing fluid. For Shergood aircraft, Type 3 anti-icing fluid should be used.
Each fluid is characterized by a HOT (Hold Over Time), and a minimum rotation speed. The HOT is the time the fluid will remain effective at preventing ice build-up, and the minimum rotation speed is the airspeed required to shear off the fluid. Type 2 and 4 fluids are generally used on large transport aircraft with high rotation speeds, while Type 3 fluids are used on medium sized aircraft. Type 1 fluids are suitable for all aircraft. The characteristics and colors of the four fluid types are summarized in the table below:
|Fluid||Color||HOT (min.)||Min. Rotation Speed|
|Type 2||STRAW||0:30||100 Kts|
|Type 3||YELLOW-GREEN||0:20||60 Kts|
|Type 4||EMERALD-GREEN||1:00||100 Kts|
3.2 Tank Levels
The deicer truck has two fluid tanks with levels shown with sightglasses on the back of the truck (see Figure 1). The left sightglass shows the level in the 1500 gallon tank for Type 1 fluid. The right sightglass shows the level in the 300 gallon tank for type 2, 3 or 4 fluid. Only one fluid type at a time can be used in the right tank. The fluid type in the right tank can be determined from the label next to the sightglass, or from the fluid color as seen in the sightglass.
Fluid for the deicer is distributed in 250 gallon totes (see Figure 2). There are separate totes for each fluid type. You can identify the fluid in a tote from the color and the label on the tote.
To transfer fluid from a tote to the deicer, using the following procedure:
- Rez the tote near your truck
- Click on the tote
- The tote will scan the area and search for nearby trucks. Click on the number for the truck you wish to fill.
If a tote is not completely used, its fluid level will be visible on the side of the container. Type 1 totes will always fill the 1500 gallon tank on the left, while any other fluid will fill the 300 gallon tank on the right. If the right tank contains a fluid other than that in the tote, then fluid in that tank will be replaced with the fluid in the tote.
By default, totes can only be used by the owner. You can change the access to the tote by clicking on it and choosing "[ACCESS]". You can select between owner-only, group-only and public access. You must also have access to the target vehicle in order to for the tote to detect it.
Totes are available for free from any Shergood store or other distributer. Totes are no-copy and can be discarded once empty. Locations at which totes may be obtained include:
4 Bucket Operation
To operate the bucket, sit on the bucket. The arrow keys can be used to control the boom, bucket or nozzle with the PgUp key being used to select which part of the bucket is being controlled by the arrows. The PgDn key is used to select the fluid type. Use the left mouse button to toggle fluid flow from the nozzle on and off. The key functions are summarized in the following table:
|Rotates boom, bucket or nozzle left/right|
|Raises/lowers boom, tilts bucket or nozzle forward/back|
|Switches between boom, bucket or nozzle control|
|Toggles fluid type|
|Toggles nozzle on/off|
By default, the camera will be positioned above and behind the bucket, but you can switch to mouselook for a view from inside the bucket.