MD-500D/Appendices

From
< MD-500D
Revision as of 04:12, 21 November 2026 by Kelly (talk | contribs) (Created page with " <span class=sa-section>APPENDIX A. SWITCHES AND WARNING LIGHTS</span> === Switch Summary === The following tables provide a summary of the switches and circuit breakers ins...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

APPENDIX A. SWITCHES AND WARNING LIGHTS

1 Switch Summary

The following tables provide a summary of the switches and circuit breakers installed in the MD-500D helicopter. Controls are grouped according to their primary function.

1.1 Electrical and Engine Controls

Switch Function
BATTERY / EXT PWR Selects battery or external electrical power.
STARTER Engages the engine starter for engine starting.
FUEL CUTOFF Controls fuel delivery to the engine.
GENERATOR Connects or disconnects the generator from the aircraft electrical system.
START PUMP Controls the fuel start pump.
SCAV AIR Controls engine scavenging air.
AUTO REIGN Enables automatic engine reignition.
ENGINE ANTI-ICE Controls the engine anti-icing system.
FILTER BYPASS Controls the engine air filter bypass.
AUX FUEL Controls the auxiliary fuel system.
N2 TRIM UP Increases the N2 governor speed setting.
N2 TRIM DOWN Decreases the N2 governor speed setting.
KEY Controls keyed aircraft functions.

1.2 Lighting Controls

Switch Function
POSITION LIGHTS Controls the aircraft navigation lights.
ANTI-COLLISION Controls the anti-collision lighting.
LANDING LIGHT Controls the landing light.
BELLY LANDING LIGHT Controls the belly-mounted landing light.
SEARCH LIGHT Controls the searchlight.
CABIN LIGHTS Selects cabin lighting mode.
PASSENGER LIGHTS Selects passenger compartment lighting mode.
PITOT HEAT Provides electrical heating to the pitot tube.

1.3 Other Controls

Switch Function
ELT Selects the operating mode of the emergency locator transmitter.
AIR VENT Controls cabin ventilation.
CABIN HEAT Controls cabin heating.
UTILITY POWER Controls power to utility equipment.
CDI GPS Selects GPS or VOR navigation as the source for the course deviation indicator.

1.4 Circuit Breakers

Circuit breakers protect individual electrical circuits against excessive current. A tripped circuit breaker indicates a possible electrical overload or circuit malfunction.

Circuit Breaker Protected Circuit
GYRO Gyroscopic flight instruments.
LDGLT Landing light.
PNL LT Instrument panel lighting.
INST Aircraft instruments.
TRIM N2 governor trim system.
N2GOV N2 governor.
ENGOUT Engine failure warning system.
GEN Generator circuit.
NAVCOM Navigation and communication radio equipment.
XPDR Transponder.
FLOATS Emergency flotation system.
CARGO Cargo equipment.
CIGAR Auxiliary electrical power outlet.
STARTPMP Fuel start pump.
SRCHLT PWR Searchlight power circuit.
SRCHLT CONT Searchlight control circuit.

CAUTION: A circuit breaker that trips repeatedly indicates a possible electrical malfunction. Do not repeatedly reset a tripped circuit breaker without determining the cause.

2 Warning Lights Summary

The MD-500D is equipped with a caution and warning annunciator panel providing indications of engine, transmission, electrical, and fuel system conditions.

All annunciators are red. The PRESS TO TEST control is used to verify the operation of the warning lights.

Annunciator Description
ENGINE OUT Indicates engine failure or an engine operating condition below the engine failure warning threshold.
XMSN OIL PRESS Indicates low main transmission oil pressure.
XMSN OIL TEMP Indicates excessive main transmission oil temperature.
GEN OUT Indicates that the generator is not supplying electrical power to the aircraft.
ENGINE CHIPS Indicates detection of metallic particles in the engine oil system, suggesting possible internal engine damage.
M/R XMSN CHIPS Indicates metallic particles detected in the main rotor transmission oil system.
T/R XMSN CHIPS Indicates metallic particles detected in the tail rotor transmission oil system.
FUEL LOW Indicates that fuel quantity has fallen below the low-fuel warning threshold.
FUEL FILTER Indicates excessive restriction or differential pressure across the fuel filter.

2.1 Warning Light Test

The PRESS TO TEST control permits verification of the warning annunciator lamps.

  1. Electrical power - ON.
  2. PRESS TO TEST - PRESS.
  3. All warning annunciators - ILLUMINATED.
  4. PRESS TO TEST - RELEASE.
  5. Warning annunciators - VERIFY NORMAL.

Any annunciator that fails to illuminate during the test shall be considered inoperative until the fault is corrected.

2.2 Warning Light Response

Illumination of a warning annunciator during flight indicates an abnormal condition requiring pilot attention.

The pilot shall identify the affected system and perform the applicable procedure described in the Emergency Procedures section of this manual.

WARNING: Illumination of an ENGINE OUT, XMSN OIL PRESS, ENGINE CHIPS, M/R XMSN CHIPS, or T/R XMSN CHIPS annunciator may indicate a condition requiring immediate corrective action or landing.