Steamly S2-S/General
SECTION 1. GENERAL
Contents
1 N-NUMBER ASSIGNMENT
When you rez your aircraft for the first time, it will attempt to contact registration server and assign you a unique N-number. If for some reason the server cannot be contacted, the aircraft will retain the "N-TEMP" registration. You can attempt to register again either by rerezing the aircraft, or by going to the @REGISTER menu and selecting the [Register Now] button (click the glass bubble to access the menu). When an aircraft has not been registered, the @REGISTER will be available on the main menu. Once the aircraft is registered, you can access the @REGISTER menu as a sub-menu of the @Admin menu. You can also request a different N-number through the @REGISTER menu. Select the [N Number] button and enter an N-Number request. The N-number must be in a valid format, and must not be assigned to another aircraft. Valid N-Numbers must begin with an "N", followed by 3 to 5 alpha-numeric digits (however, only the last two digits may be letters). Alternatively you can select one of the international registration formats L-LLLL or LL-LLL where the "L" are letters. Your distribution also comes with a registration certificate. You can use this to fetch and display your registration information, but its use is optional and not required to assign or change N-numbers for your aircraft.
2 CONTROLS
This aircraft supports two separate control schemes. Control scheme 1 features a traditional layout with the cyclic controlled by the arrow keys, whereas control scheme 2 features a "two handed" layout with either both hands on the keyboard, or left hand on keyboard and right hand on the mouse. Regardless of the scheme selected, controls can also be moved through the HUD by pressing and holding the left mouse button and dragging the appropriate slider in the HUD. In both control schemes, some key commands are activated through gestures included in a box as part of the product carton. Key commands requiring a gesture are marked with a [G] in the key command lists below.
2.1 CONTROLS LAYOUT "K" (KEYBOARD)
Keyboard control features a traditional layout with the cyclic controlled by the arrow keys.
| Key | Description |
|---|---|
| Left/Right/Up/Down (or A/D/W/S) | Cyclic (Left/Right/Forward.Back) |
| PgUp/PgDown (or E/C) | Collective (Up/Down) |
| R/V | Throttle (Up/Down) [G] |
| L. Mouse + Left/Right (or A/D) | Pedals (left/right)* |
| Shift-Left/Shift-Right | Alternate pedal control (not available in mouselook) |
| Z/X | Alternate pedal keys (left/right) [G] |
| . | Center cyclic [G] |
| p | Toggle camera view [G] |
| q | Toggle fine control [G] |
| [/] | Mixture lean/rich [G] |
| shift-[/] | Rotor brake on/off [G] |
- NOTE ON PEDALS: Because the left mouse button is intercepted by the touch scripts in the heli, the L.Mouse + Arrow key combination will only work in mouselook, or in external view modes. There is also a "mouselook touch" mode that is toggled by the "mlt" chat command. This toggles whether mouse clicks while in mouselook affect switches and buttons in the cockpit, or are used for pedals.
2.2 CONTROLS LAYOUT "H" (HUD OR TWO-HANDED KEYBOARD)
| Key | Description |
|---|---|
| Up/Down (or W/S) | Collective (Up/Down) |
| Left/Right (or E/C) | Anti-Torque Pedals |
| J/L/I/K | Cyclic left/right/forward/back [G] |
| R/V | Throttle (Up/Down) [G] |
| . | Center cyclic [G] |
| p | Toggle camera view [G] |
| q | Toggle fine control [G] |
| 1 | Master [G] |
| 2 | Generator [G] |
| 3 | Fuel Pump [G] |
| 4 | Governor [G] |
| 5 | Beacon [G] |
| 6 | Nav Lights [G] |
| 7 | Landing Lights [G] |
| 8 | Panel Lights [G] |
| 9 | Instrument Lights [G] |
| Shift-1/2/3/4 | Magnetos off/right/left/both [G] |
| [/] | Mixture lean/rich [G] |
| shift-[/] | Rotor brake on/off [G] |
3 CHAT COMMANDS
| Command | Description |
|---|---|
| tm | Toggle master |
| tg | Toggle generator |
| tfp | Toggle fuel pump |
| tgov | Toggle governor |
| tb | Toggle beacon |
| tn | Toggle nav lights |
| tt | Toggle taxi light |
| tl | Toggle landing light |
| ti | Toggle instrument lights |
| mgo/mgr/mgl/mgb | Set magnetos to off/right/left/both |
| mx<n> | Set mixture where <n> is one or two digit number |
| rb<n> | Set rotor break where <n> is one or two digit number |
| th<n> | Set throttle where <n> is one or two digit number |
| cv | Toggle camera view |
| qstart | Do a quick start (skip full start procedure) |
| qstop | Do a quick shutdown (skip full shutdown procedure) |
| hud | Get copy of hud |
| poh | Get copy of POH (Pilot Operating Handbook) |
| fc | Toggle fine control |
4 CAMERA
The default camera position is inside the cockpit with a view through the front glass. It is also possible to switch to an outside "follow cam" view. Wear the "cameraViews" gestures and use the "p" key to toggle views. In addition, it is possible to fly in mouselook when using one of the keyboard based flight control methods.
5 FINE CONTROL
The "fc" chat command or "q" gesture command toggle fine control for key commands. While fine control is active, key commands will have half the effect the do in regular mode. This can be useful when higher precision is need such as for making an accurate landing on a small platform.
