H-34 Choctaw/Appendices

From
< H-34 Choctaw
Revision as of 14:10, 10 September 2021 by Kelly (talk | contribs) (Knobs)
Jump to: navigation, search

SECTION 13. APPENDICES

1 SWITCH SUMMARY

This section describes the various switches in the S-58 and their functions (used with s, s1 and s0 commands for normal switches s0, s1, s2, etc. for rotary switches). Push buttons (marked with [b]), and rotary knobs (marked with [r]) are also shown here. Switches that are for RP purposes only and do not have an effect on the helicopter are marked [RP] in the description. For switches that have guards, the guard is addressed by appending a "-g" to the switch name (marked with [-g] after the name in the table below).

1.1 Switches

Name Description
inv Inverter Select
oildil Oil Dillution
bstpmp Boost Pump
clutch Clutch Engagement
fuelcutoff Fuel Cut-off
elt [ts] ELT
fan Cabin fan
pitot Pitot heat
read Passenger Reading Lights
posbrt Position light brightness
alarm[-g] Crew alarm
beacon Beacon
sticktrim Stick Trim
cablecut[-g] Hoist cable cut (cockpit)
radio Radio master
elecbarr Electric barrier door
brake Parking Brake
taillock Tailwheel Lock
floodlts [ts] Flood and hover lights
hoist [ts] Hoist Mode
heat [ts] Cabin Heat
posmode [ts] Position light mode
cabinlts [ts] Main cabin lights
dcpwr [ts] DC Power
ckptdome [ts] Cockpit dome light
hook [ts] Cargo hook mode
ldglts [ts] Landing Lights
servo [ts] Servo Mode
cabCableCut[-g] Hoist Cable Cut (cabin)

1.2 Knobs

Name Description Positions
emerlts Instrument Emergency Lights 0:off, 1-3:levels, 4:high
conalts Console A Panel Lights (copilot) 0:off, 1-3:levels, 4:high
nonfltlts Non-Flight Instrument Lights 0:off, 1-3:levels, 4:high
fltlts Flight Instrument Lights (pilot) 0:off, 1-3:levels, 4:high
mags Magnetos/Ignition 0:OFF, 1:L, 2:R, 4:BOTH
fuelsel Fuel Indicator Select 0:TOT, 1:FWD, 2:CTR, 3:AFT
xpdr Transponder Mode 0:off, 1:sby: 2:on, 3:alt, 4:tst
cgtrim CG Trim 0:F3, 1:F2, 2:F1, 3:CTR, 4:A1, 5:A2, 6:A3
yawtrim Yaw Trim 0:L4, 1:L3, 2:L2, 3:L1, 4:CTR, 5:R1, 6:R2, 7:R3, 8:R4
txsel Transmit Select 0:COM1, 1:COM2, 2:HF, 3:UHF
wipers Windshield Wipers 0:Park, 1:Off, 2:Fast, 3:Med, 4:Slow