H-34 Choctaw/Appendices
SECTION 13. APPENDICES
1 SWITCH SUMMARY
This section describes the various switches in the S-58 and their functions (used with s, s1 and s0 commands for normal switches s0, s1, s2, etc. for rotary switches). Push buttons (marked with [b]), and rotary knobs (marked with [r]) are also shown here. Switches that are for RP purposes only and do not have an effect on the helicopter are marked [RP] in the description. For switches that have guards, the guard is addressed by appending a "-g" to the switch name (marked with [-g] after the name in the table below).
1.1 Switches
Name | Description |
---|---|
inv | Inverter Select |
oildil | Oil Dillution |
bstpmp | Boost Pump |
clutch | Clutch Engagement |
fuelcutoff | Fuel Cut-off |
elt [ts] | ELT |
fan | Cabin fan |
pitot | Pitot heat |
read | Passenger Reading Lights |
posbrt | Position light brightness |
alarm[-g] | Crew alarm |
beacon | Beacon |
sticktrim | Stick Trim |
cablecut[-g] | Hoist cable cut (cockpit) |
radio | Radio master |
elecbarr | Electric barrier door |
brake | Parking Brake |
taillock | Tailwheel Lock |
floodlts [ts] | Flood and hover lights |
hoist [ts] | Hoist Mode |
heat [ts] | Cabin Heat |
posmode [ts] | Position light mode |
cabinlts [ts] | Main cabin lights |
dcpwr [ts] | DC Power |
ckptdome [ts] | Cockpit dome light |
hook [ts] | Cargo hook mode |
ldglts [ts] | Landing Lights |
servo [ts] | Servo Mode |
cabCableCut[-g] | Hoist Cable Cut (cabin) |
1.2 Knobs
Name | Description | Positions |
---|---|---|
emerlts | Instrument Emergency Lights | |
conalts | Console A Panel Lights (copilot) | |
nonfltlts | Non-Flight Instrument Lights | |
fltlts | Flight Instrument Lights (pilot) | |
mags | Magnetos/Ignition | |
fuelsel | Fuel Indicator Select | |
xpdr | Transponder Mode | |
cgtrim | CG Trim | |
yawtrim | Yaw Trim | 0:L4, 1:L3, 2:L2, 3:L1, 4:CTR, 5:R1, 6:R2, 7:R3, 8:R4 |
txsel | Transmit Select | 0:COM1, 1:COM2, 2:HF, 3:UHF |
wipers | Windshield Wipers | 0:Park, 1:Off, 2:Fast, 3:Med, 4:Slow |