UH-4 Commuter/Normal Procedures

From
< UH-4 Commuter
Revision as of 01:07, 2 August 2021 by Kelly (talk | contribs) (Created page with "===STARTING==== Use the following procedure for normal starts: #Cyclic, anti-torque pedals neutral. Collective full down. #Master On #Alternator On #Throttle to idle #Mixture...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

STARTING=

Use the following procedure for normal starts:

  1. Cyclic, anti-torque pedals neutral. Collective full down.
  2. Master On
  3. Alternator On
  4. Throttle to idle
  5. Mixture full rich
  6. Mags to Both
  7. Press and hold starter until engine starts
  8. Slowly roll throttle on to 2500
  9. Governor on
  10. Allow RPM increase to 2900

To bypass the normal procedure and start immediately, you can use the "Fast Start" button or simply type "qstart" in local chat.

Retrieved from "https://shergoodaviation.com/wiki/index.php?title=UH-4_Commuter/Normal_Procedures&oldid=2988"