S-61R Pelican/SL Features

SECTION 12. SL FEATURES

1 HUDS

Figure 1: S61 Main HUD

Figure 2: S61 Winch HUD

Figure 3: S61 Preflight HUD

The S61R comes with three HUDS: a main HUD, a winch HUD and a preflight HUD. These are described in the following sections.

1.1 Main HUD

The main HUD (see Figure 1) attaches in the lower right corner by default. When not sitting in an aircraft, the HUD will be dark with the word "Disconnected" showing on it. You can connect to a helicopter by sitting in it in the pilot or co-pilot seat. If the HUD fails to connect, or becomes disconnected for some reason, you can click on the aircraft window and choose "HUD Connect" from the main menu. The HUD consists of a core part with the flight controls, and two pop-out instrument sets.

The core of the HUD includes the following elements:

• Collective - Red dot shows the current position of the collective which moves on a linear scale.
• Cyclic - Red dot shows the current position of the cyclic which moves in 2-dimensions.
• Anti-Torque - Red dot shows the current position of the anti-torque pedals which moves on a linear scale.
• Crossing Status - Indicator dot in upper left corner shows green when the HUD is active, and yellow when inactive for a region crossing.
• Tail Number - The tail number of the aircraft the HUD is connected to.
• HOBBS - The HOBBS time (total operating time) of the aircraft the HUD is connected to.

On the left is a popout set of the following six instruments: Percent Torque, Airspeed, Radar Altimeter, Rotor/Engine RPM, Vertical Speed Indicator, and Altimeter. On the right is a popout for the fuel gauges. Click on the tabs on the sides of the HUD core to pop out or retract the instrument clusters.

1.2 Winch HUD

The winch HUD (see Figure 2) can be used to control the winch by any crew member in the the helicopter. In order for the HUD to be active, the helicopter must have hydraulic and electrical power, and the HOIST MASTER must be in the CREW position. The winch HUD has two buttons on the left side to raise and lower the winch. A digital display shows the current cable length and the current height above the ground. A dial on the right-hand side sets the winch speed. Finally an emergency cable cut button with a guard is located on the top portion of the HUD.

1.3 Preflight HUD

A preflight HUD with the preflight checklist is provided to assist with the preflight inspection. Arrows on the top can be used to change pages, and "home" icon can be used to return to the first page.

The preflight HUD can be found in the aircraft box, or can be accessed from the helicopter @Get menu or by using the "prehud" chat command.

2 Seating

For the purpose of access control, there are three classes of seats: pilot, crew and passenger. Each class can be set to "R" to show it is in restricted mode or "G" for guest mode. When a seat class is in guest mode, anyone can use that seat. When A seat class is in "R" mode, only the owner, or those explicitly granted access can use the the seat. The access controls are found in the @Admin menu which is accessible only by the owner.

2.1 Seat Access Control

Seats included in each seat class are described in the following table:

Seat Class	Description
Pilot	Pilot and Co-Pilot Seats
Crew	RDF Operator and Winch Operator Positions
Passenger	All other seats

2.2 Pilot Access List

Access to the helicopter can also be granted through a named-pilot access list via the @Admin menu. Pilots on this list have full access to the helicopter, except for the @Admin menu. They can pilot and/or service the helicopter. The following buttons in the @Admin menu are used to manage the access list:

• Add - Adds a new pilot to the list. The pilot should be standing within 10m of the aircraft to be added.
• Remove - Removes a pilot from the access list.
• List - Lists all pilots who are currently on the access list.

2.3 Seat List

Seat	Class	Description
Pilot	Pilot
Co-Pilot	Pilot
RDF Operator	Crew
Winch Operator	Crew
Troop Seats 1-4	Passenger
Stokes Basket (stowed)	Passenger
Litter	Passenger
Rope	Passenger
Harness	Passenger
Rescue Equipment	Passenger

4 Menus

Menus are only available to the owner and registered or guest pilots of the aircraft. In general button options beginning with an "@" are sub-menus, and options beginning with "( )" or "(*)" are options that can be toggled.

4.1 Main Menu

The buttons on the main menu are:

Button	Description
Park/Unpark	Make the aircraft non-physical/physical. Normally this occurs automatically when you sit in the aircraft, but this option can be used to control this manually.
Eject	Select an occupant to eject
Safe Unsit	Slide avatar outside aircraft before unseating them. Useful when aircraft is physical.
@Options	Control various flight option settings.
@Get	Get various things include HUD and manual/help notecards
HUD Connect	Reestablish connectivity between helicopter and HUD if it becomes disconnected, or if you wear HUD while already seated.
@Admin	Access owner-only options
@Cheat	Displays the "Cheat" menu with options to bypass various procedures. See "CHEATS" below for more details.
@Realism	Enable or disable "realism" features of the aircraft flight characteristics.
@REGISTER	Access the aircraft registration menu. This button will only appear on the main menu if an N number had not yet been assigned. (aircraft must be parked/non-physical)

4.2 ADMIN MENU

The admin menu contains options only available to the aircraft owner. Buttons/Options are:

Button	Description
Recal. W&B	If you make any changes to the linkset, you should use this option to recalibrate the weight & balance for the scripts.
(?) Pilot	Set pilot seat to guest (G) or restricted (M)
(?) Crew	Set copilot seat to guest (G) or restricted (M)
(?) Passenger	Set passenger seats to guest (G) or restricted (M)
Add Crew	Add an authorized crew member. A maximum of 12 crew members can be registered. The crew member to be added should stand within 10m of aircraft to be recognized by the system.
Remove Crew	Remove a crew member from the authorized crew member list.
List Crew	List the authorized crew members.
@REGISTER	Assign or changer your aircraft's registration. See "N-NUMBER ASSIGNMENT" in Section 1 for more details. (aircraft must be parked/non-physical)
@Paint	Change the color/markings of your aircraft. See "PAINTKIT SYSTEM" below for more details. (aircraft must be parked/non-physical)

4.3 PAINTKIT SYSTEM

The paintkit system allows you to change the appearance of your helicopter. It is accessed through the @Paint sub-menu found on the @Admin menu. On this menu there are several built-in colors, and a "Custom" button to load a paint set from a separate "paintkit" prim. For custom designs you can either use a paintkit from a 3rd party vendor, or load your own texture set into the paint kit that came with your helicopter. To apply a paintkit, simply rez the paintkit near your helicopter and select "*Custom" from the @Paint menu. The helicopter will search for nearby paintkits and allow you to choose which you want to apply. Instructions on how to create your own custom paintkits can be found in the paintkit object.

4.4 OPTIONS MENU

The options menu is accessed from the @Options button on the main menu and is available to any registered pilot.

Button	Description
(?) Chat	If enabled, information chat messages will be disaplayed. If disabled, all informational chat messages will be suppressed.
(?) Controls	Select a control scheme. Control schemes are discussed in the CONTROLS section near the beginning of this document.
(?) Fast Fluids	Causes engine oil, transmission and hydraulic fluids to be used at 100 times normal rate.
(?) Failures	Enabled/disable the random failure system.
(?) Fragile	If enabled, a crash will cause helicopter to burst into flames and become non-responsive. Resets after a set time (or until ELT is turned off).
(?) Copilot	Enable or disabled copilot controls
(?) Int-Menu	Disables access to menu from clicks on the internal surface of the window.
(?) Alerts	If enabled, alert messages about collisions or other unsafe conditions will be given. If disabled, no alert messages will be issued.
(?) Dust	If enabled, dust effects are produced when the aircraft is near the ground, water, or over a prim.

4.5 CHEATS MENU

The cheats menu accessed from the @Cheat button on the main menu allows you to access functions to bypass several of the normal procedures.

Button	Description
Charge Bat.	Charge the battery to full.
Fill Fluids	Sets all non-fuel fluids to full.
Fast Start/Stop	Use this button to start or stop your helicopter without going through the full procedure. You will still need to wait for the rotors to come to full speed when using Fast Start.
Repair	Repairs all accumulated damage and failures.
Replace All	Replaces all service time limited components.
Empty Bilge	Removes any water from the bilge spaces.
Ramp Up	Forces ramp to up position.
Ramp Down	Forces ramp to down position.
@Fuel	Accesses a sub-menu that lets you set the fuel level to a specific level.

4.6 REALISM MENU

The realism menu lets you enable or disable some of the RL helicopter flight characteristics. The features that can be enabled/disabled are:

Button	Description
Battery	If disabled, the battery will not run out.
Fluids	If disabled, fluids (oil, etc.) will not be consumed as helicopter runs.
Density	If enabled, density altitude will have an effect on aircraft performance. This comes in play when operating at high altitudes. At high altitudes hover height and climb rate will be reduced from their values at lower altitudes.
ETL	If enabled, additional lift/performance is gained when forward airspeed goes above about 20 knots due to the main rotors constantly moving into clean air. When disabled, the additional performance is always available.
Low RPM	When enabled, pulling excessive collective can result in decay of main rotor RPM.
Vortex	When enabled, the helicopter can be subject to "vortex ring state" also known as "settling with power". This can occur when the helicopter is in a vertical descent of more than 300 feet/min with a forward speed of less than 30 knots while collective is at more than 50%. When vortex ring state occurs, the helicopter will experience a loss of lift and begin descending rapidly, even if additional collective is pulled.
Translate	If enabled, the effects and compensation for translating tendency are disabled.