Difference between revisions of "KellyFuel"
(Tag: Undo) |
|||
| Line 6: | Line 6: | ||
|- | |- | ||
| | | | ||
| − | [[File: | + | [[File:Kellyfuel.jpg|350px]] |
|- | |- | ||
|} | |} | ||
== Introduction == | == Introduction == | ||
| + | |||
| + | == Selecting Aircraft == | ||
| + | |||
| + | To use the KellyFuel 3.0 pump to service your aircraft, use the following procedure to prepare aircraft for fueling: | ||
| + | |||
| + | # Park aircraft within 20m of pump. | ||
| + | # Click pump. Select aircraft by tail number. | ||
| + | # Select tank on aircraft to be filled. | ||
| + | # Open access door and cap for that tank. | ||
| + | # Click ground wire spool near Jet-A or 100LL side of pump as appropriate to attach ground wire to aircraft. | ||
| + | |||
| + | == Fueling Aircraft == | ||
| + | |||
| + | Once aircraft has been selected, to Fuel Aircraft: | ||
| + | |||
| + | # Click on fuel hose insert nozzle into filler. | ||
| + | # Press ENT on keypad to verify it has been grounded | ||
| + | # Click the credit card reader to "read" your credit card (RP Only) | ||
| + | # Select 2 for Jet-A Fuel | ||
| + | # Enter the maximum number of gallons, then ENT | ||
| + | # Reset the meter by clicking the knob on the side | ||
| + | # Turn the switch next to the pump on the Jet-A side to ON | ||
| + | # Wait for fueling to complete. Fueling will stop when requested number of gallons have been added, the tank is full, or you turn the fuel switch to OFF. | ||
| + | # Press either 1 to fuel another tank, or 2 to end fueling. | ||
Revision as of 18:04, 25 August 2021
|
Kelly Fuel |
|
|
1 Introduction
2 Selecting Aircraft
To use the KellyFuel 3.0 pump to service your aircraft, use the following procedure to prepare aircraft for fueling:
- Park aircraft within 20m of pump.
- Click pump. Select aircraft by tail number.
- Select tank on aircraft to be filled.
- Open access door and cap for that tank.
- Click ground wire spool near Jet-A or 100LL side of pump as appropriate to attach ground wire to aircraft.
3 Fueling Aircraft
Once aircraft has been selected, to Fuel Aircraft:
- Click on fuel hose insert nozzle into filler.
- Press ENT on keypad to verify it has been grounded
- Click the credit card reader to "read" your credit card (RP Only)
- Select 2 for Jet-A Fuel
- Enter the maximum number of gallons, then ENT
- Reset the meter by clicking the knob on the side
- Turn the switch next to the pump on the Jet-A side to ON
- Wait for fueling to complete. Fueling will stop when requested number of gallons have been added, the tank is full, or you turn the fuel switch to OFF.
- Press either 1 to fuel another tank, or 2 to end fueling.
