Difference between revisions of "H-34 Choctaw/Appendices"
(→Switches) |
(→Switches) |
||
| Line 11: | Line 11: | ||
!Description | !Description | ||
|- | |- | ||
| − | | | + | |inv||Inverter Select |
| + | |- | ||
| + | |oildil||Oil Dillution | ||
| + | |- | ||
| + | |bstpmp||Boost Pump | ||
| + | |- | ||
| + | |clutch||Clutch Engagement | ||
| + | |- | ||
| + | |fuelcutoff||Fuel Cut-off | ||
|} | |} | ||
Revision as of 02:51, 16 July 2021
SECTION 12. APPENDICES
1 SWITCH SUMMARY
This section describes the various switches in the S-58 and their functions (used with s, s1 and s0 commands for normal switches s0, s1, s2, etc. for rotary switches). Push buttons (marked with [b]), and rotary knobs (marked with [r]) are also shown here. Switches that are for RP purposes only and do not have an effect on the helicopter are marked [RP] in the description. For switches that have guards, the guard is addressed by appending a "-g" to the switch name (marked with [-g] after the name in the table below).
1.1 Switches
| Name | Description |
|---|---|
| inv | Inverter Select |
| oildil | Oil Dillution |
| bstpmp | Boost Pump |
| clutch | Clutch Engagement |
| fuelcutoff | Fuel Cut-off |
