Deicing Truck

Deicing Truck Add-on

1 Introduction

The Shergood Deicer is an add-on for the Lusch Hermes Modular Truck. It is compatible with select Shergood aircraft and can be used for both deicing and anti-icing purposes. The truck has a 1500 gallon main tank for Type 1 deicing fluid, and a 300 gallon secondary tank which can be used for Type 2, 3 or 4 deicing fluids. Fluids can be applied through a sprayer on a boom mounted bucket, or through a hose system at the back of the vehicle. The truck is refilled using 250 gallon totes.

2 Installation

To install your deicing add-on, use the following procedure:

1. Rez your deicer add-on next to your Lusch Hermes Modular Truck.
2. Click the truck and select "EDIT MODE" from the menu.
3. Wait approximately 5 seconds for the hover text on the truck to change to "EDIT MODE ON!".
4. Right click on the deicer add-on and select "Edit".
5. Hold shift and click on the truck.
6. Select "Link" from the edit menu. The deicer add-on should snap into place.
7. Click on the truck cab and select "YES" when it asks if you want to exit edit mode.

Your deicer truck is now ready to use.

3 Servicing

3.1 Fluid Types

There are four main times of de-cing and anti-icing fluids used for aircraft: Type 1, 2, 3 and 4. Type 1 fluids have the lowest viscosity are generally used for removing existing ice from an aircraft.

Fluid	Color	HOT (min.)	Min. Rotation Speed
Type 1	RED-ORANGE	n/a	n/a
Type 2	STRAW	0:30	100 Kts
Type 3	YELLOW-GREEN	0:20	60 Kts
Type 4	EMERALD-GREEN	1:00	100 Kts