Difference between revisions of "H-34 Choctaw/Appendices"
(→Switches) |
(→Switches) |
||
| Line 46: | Line 46: | ||
|- | |- | ||
|taillock||Tailwheel Lock | |taillock||Tailwheel Lock | ||
| + | |} | ||
Revision as of 03:14, 16 July 2021
SECTION 12. APPENDICES
1 SWITCH SUMMARY
This section describes the various switches in the S-58 and their functions (used with s, s1 and s0 commands for normal switches s0, s1, s2, etc. for rotary switches). Push buttons (marked with [b]), and rotary knobs (marked with [r]) are also shown here. Switches that are for RP purposes only and do not have an effect on the helicopter are marked [RP] in the description. For switches that have guards, the guard is addressed by appending a "-g" to the switch name (marked with [-g] after the name in the table below).
1.1 Switches
| Name | Description |
|---|---|
| inv | Inverter Select |
| oildil | Oil Dillution |
| bstpmp | Boost Pump |
| clutch | Clutch Engagement |
| fuelcutoff | Fuel Cut-off |
| elt [ts] | ELT |
| fan | Cabin fan |
| pitot | Pitot heat |
| read | Passenger Reading Lights |
| posbrt | Position light brightness |
| alarm | Crew alarm |
| beacon | Beacon |
| sticktrim | Stick Trim |
| cablecut[-g] | Hoist cable cut |
| radio | Radio master |
| elecbarr | Electric barrier door |
| brake | Parking Brake |
| taillock | Tailwheel Lock |
